How to Set Up Fire TV Stick with IPTV Smarters Pro

On the home screen of your device, hover over the Search option.

Step 1: Installing the app downloader will come first.

Since browser-based downloads are prohibited, this program will assist you with downloading IPTV Smarter on FireStick.

Step 2: Select Search > Search from the FireStick home screen.

Step 3: Type the application's name (Downloader, for example).

When the Downloader option shows up in the search results, click on it.

Download and install the application by selecting the Downloader icon on the subsequent screen.

 

Step 4: Return to the FireStick home screen after installing the Downloader software.

From the menu bar, select Settings.

Step 5: Choose My Fire TV from the Settings menu.

Step 6: Click Downloader Options when all of the options below show up on the subsequent screen.

Click Install from unknown applications in step seven.

Step 8: To switch the status to ON, click Downloader.

 

The FireStick settings have now been set up to permit the installation of third-party apps, including Smarters IPTV. Take the actions listed below:

Step 9: The Downloader application is now available for use.
A set of prompts will show up when you initially start this application. Ignore them till the next screen appears.

You must click on the URL text box on the right of this screen where it reads "http://" (be sure to select the "Home" option from the menu on the left).

Step 10: Type the following path into this window:

The Mainsmarts

Press "GO."

Step 11: Give your FireStick device a minute or two to download IPTV Smarter.

Step 12: The Downloader app will launch the APK file after the download is finished.

Step 13: Give the installation time to finish.

Step 14: A notification stating that the application has been installed will appear at the conclusion of the installation.

At this point, you can click OPEN to begin utilizing IPTV Smarters.

In order to save space on your FireStick storage and remove the APK file first, I advise choosing DONE.

1. Application: Smarters Player Lite

How to configure IPTV on Apple/IOS with Smarters Player Lite

Step 1: First, download the Smarters Player Lite app from Apple Store via this URL:

App Apples

or you can search for it in the App Store

install the application on your iOS device.

Step 2: After downloading, open the application and enter your authentication credentials.

Step 3: Enter the authentication details you received when you signed up.

Now click on “Add User” to go to the next section.

Step 4: Wait a few seconds.

Step 5: Now click on the “Live TV” icon, which is marked by a red arrow in the image.

Step 6: Now select the group of channels you want to watch and move on to the next section.

Step 7: Click on the channel name and double click on the small screen to put it in full screen as the last step.

Step 8: To add the EPG, you don’t need to add EPG url, just click “Install EPG”…

Completed

2nd Application: GSE Smart IPTV

The GSE Smart IPTV application is available for iPhone, iPad, tvOS and Mac OS X. You can download it from the App Store.

Download for iOS devices :

apps apple

Step 1: Navigate to the XTREAM CODES API

Step 2: Press the + symbol to add a new list of XTREAM CODES.

Step 3: Enter your Xtream database details
In the first field, choose a name for your list (it can be anything you want) and then enter your username, password and the URL we provided. Enable automatic EPG update and click LOGIN.

These are the suggested apps, although our service works with any application. The IPTV Smarters PRO app First, launch the Google Play Store. Step 2: Look for and install "IPTV Smarters PRO" or "Smarters Player Lite": Step 3: Click "Login with Xtream Codes API" after launching IPTV Smarters PRO. Step 4: Enter the information for your Xtream connection. Enter your login, password, and the URL we provided in the first field, then click ADD USER. You can choose whatever name you wish for your list. Step 5: After roughly ten seconds, the channels and video-on-demand will begin to download. At that point, the connection will be established, and this screen will appear.

This tutorial will show you how to install your Mag (250/254/256…) in an easy and efficient manner.
Step 1: The main portal screen will show up after the box loads. Next, select "Settings" and hit the remote control's "SETUP/SET" button.Step 2: Click "Server" after selecting "System Settings."

Step 3: Select "Server."

Step 4: Click "Portals" after selecting it.

In the fifth step, type the portal URL in the "Portal 1 URL" box and the portal name in the "Portal 1 name" line. The MAC address listed on the label behind the box must be sent to us with your order in order to activate our IPTV subscription on your MAG box. The activation is entirely remote, and as seen in the image below, we will provide you a URL link to input on your portal as soon as it is activated. Step 6: To save the modifications, choose and click "OK" after you're done. Step 7: Click "EXIT" on the remote control once the settings have been saved. Step 8: The box must then be restarted. Click "OK" to have the changes take effect.

Setting up the MyTV Online 2 program
A pre-installed app on Formuler devices is called MyTV Online 2. For the Formuler Z7, Z8, Z10, and previous versions, as well as the Formuler Z Nano, the "MyTV Online" app is accessible. It is an Android software that works with both Xtream codes and the Stalker/MAG system. In a few simple steps, configure your Formuler device.

Setting up the portal

NOTE: Please connect your device to the Internet if you haven't already. In order to fully utilize the potential of the Internet, we always advise using a LAN cable. Using a wireless connection to connect your device to your Internet network may have an impact on your internet speed. We ask that you upgrade your MyTV Online 2 application if it is outdated in order to prevent programming issues.

Step 1: In the MyTV Online 2 application, please choose "Add Portal."

Step 2:

Please fill in the "Portal Nickname" form with an acronym or nickname; we suggest "IPTVPrime."

 

 

 

Step 3:

Next, click the "Login required" box, enter the username and password, and input the portal URLs that were supplied to you following your purchase or trial request.

Step Four:

Click "CONNECT" to establish a connection to your account.

Step 5:

The portal, related channels, VOD, and EPG data must now be loaded into your device. Please be patient as this may take a few minutes.

Step 6:

Your MyTV Online 2 application is now configured.

We hope you had fun watching!

 

Section 1: Roku Development Options Enabled 1. Select the HDMI input on your TV to turn on your Roku box. 2. Using your Roku remote, press the buttons listed below in that order: There are three buttons on the home screen, two up arrows, one right arrow, one left arrow, one right arrow, one left arrow, one right arrow, one right arrow, and one left arrow. 3. The Development Options menu will show up on your Roku TV screen if it is successful. 4. Write down the IP address that appears on the screen. 2. Click "Submit" after entering your Roku account password and username. 3. After logging in, choose "Add a channel with a code" under "Manage your account." 4-In the text box, type "iptvsmarters." Be sure to type the text just as it appears. 5. To add the channel to your Roku, select "Add channel." 6. When the warning notice shows, click "OK." 7. Choose "Yes, add the channel" from the pop-up window that appears. Step 3: Install the IPTV Smarters software on your PC. 5. Choose "Activate and restart installer" (you can choose "Disable" if you've already done this). 6. Click "I accept" after reading the Development Tools License Agreement. 7. Create a password for the web server using the keyboard that appears. Later on, you'll need this password. 8. Choose "Restart and set password." Add the IPTV Smarters channel in Part Two. 1. Open any browser on your PC and navigate to my.roku.com. 1. Launch any browser on your PC. Enter your Roku's IP address, which you already noted, in the address bar. 2. A window for the connection will open. Put "rokudev" as the username. Enter the password for the web server that you previously setup. Lastly, select "Connect." 3. Select "Download" on the following page. 4. Locate the IPTV Smarters package download location (mine was on my desktop). Click "Open" after selecting the downloaded folder. The IPTV Smarters file needs to be downloaded to your computer now. 1. On your PC, click this link, and the download ought to begin automatically: Type=d&id=108 in https://www.whmcssmarters.com/clients/dl.php Note: This APK is not hosted or distributed by FireStickTricks.com. You can access the page where it is housed by clicking on the link. 2. On your computer, save the IPTV Smarters package to a convenient location. You will need to access this location shortly. I'm going to store it on my desktop. Installing IPTV Smarters on Roku in Part Four 5. After the file has finished downloading, click "Install." 6. You're finished if you see this screen! 7. Return to your Roku device, and your TV will display IPTV Smarters. 8. Just enter your IPTV Smarters login information and you're ready to go!